FREE SHIPPING $500.00 OR MORE CODE FSHIP12.
NO CHEMICALS/GLASSWARE 1.800.967.5316
|
Tris buffer meter HI223 with HI1043P pH electrode | |
|  | Quantity in Basket:
none
Code: HI223TRIS
Price:$647.00
| |
| | Tris buffer meter HI223 with HI1043P pH electrode back to products
HI 223
pH Meters with Calibration Check
Description
A pH electrode that is properly manufactured and kept clean will retain its measuring integrity for quite a long time.
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note because, during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration.
pH meters on the market today will allow an offset of approximately ±60 mV. The deviation from 0 mV is not unusual, in fact it represents the true characteristics of the pH electrode. The deviation from 0 mV becomes a problem if it is the result of calibrating a dirty electrode.
HANNA®' HI 221 & HI 223 compare the characteristics of the pH electrode from one calibration to the next. In case of large variances in the electrode condition that can only be the result of a soiled sensor, these meters alert the user that the electrode needs to be properly cleaned prior to calibration and measuring.
Specifications
Range pH -2.00 to 16.00 pH; -2.000 to 16.000 pH
Range mV ±699.9 mV; ±2000 mV
Range Temperature -20.0 to 120.0°C
Resolution pH 0.01 pH; 0.001 pH
Resolution mV 0.1 (±999.9 mV); 1 (±2000 mV)
Resolution Temperature 0.1°C
Accuracy pH ±0.01 pH; ±0.002 pH
Accuracy mV ±0.2 (±699.9 mV); ±0.5 (±999.9 mV); ±1 (±2000 mV)
Accuracy Temperature ±0.4°C
Calibration Check status of electrode condition and response time,
status of the buffer solution during calibration
pH Calibration automatic, up to 5 points with 7 memorized values
(pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45)
Temperature Compensation manual or automatic, -20.0 to -120.0°C (-4 to 248°F)
pH Electrode HI 1131B, glass-body, double junction, refillable,
BNC connector, 1 m (3.3') cable (included)
Temperature Probe HI 7669/2W with 1 m (3.3') cable (included)
PC Connection RS232 opto-isolated serial port
Data Logging 500 samples
Input Impedance 1012 Ohm
Power Supply 12 Vdc adapter (included)
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 240 x 182 x 74 mm (9.4 x 7.2 x 2.9")
Weight 1.1 kg (2.4 lb.)
Order Info
HI 221 is supplied with HI 1131P refillable pH electrode (glass-body, BNC & Pin with 1m cable), HI 7669/2W stainless steel temperature probe, HI 76404 electrode holder, pH 4 and pH 7 buffer sachets, electrode refilling solution, 12 Vdc power adapter and instructions. |
| |
